5 Snap Tie Spacing Chart 2k23

Snap tie spacing chart

Snap Tie Spacing Chart. Snap tie spacing recommendation suggested spacing diagrams for snap tie system • a 9/16” drill bit is used for drilling the snap tie holes this diagram is based on: Place the bracket (jahn® a, jahn® c or omni wedge) on the tie 4.

5 Snap Tie Spacing Chart 2k23
Snap Ties Concrete Forms from starhq.co

Place the ends of snap ties through the holes in the plywood 3. Drill holes in plywood 1/8 larger than the snap tie head (usually 5/8 diameter drill bit will be required 2. The proper tie head position is at the midpoint or higher of the omni wedge slot.

1 Snap tie spacing chart

Snap Tie Spacing Recommendation Suggested Spacing Diagrams For Snap Tie System • A 9/16” Drill Bit Is Used For Drilling The Snap Tie Holes This Diagram Is Based On:

• 3/4” plywood thickness, face grain perpendicular to walers • standard 16” waler spacing with 2×4 lumber Place the bracket (jahn® a, jahn® c or omni wedge) on the tie 4.

Drill Holes In Plywood 1/8 Larger Than The Snap Tie Head (Usually 5/8 Diameter Drill Bit Will Be Required 2.

Place the ends of snap ties through the holes in the plywood 3. The proper tie head position is at the midpoint or higher of the omni wedge slot.