Plasma cutter settings chart
Plasma Cutter Settings Chart. If you switch to other auxiliary cutting gases, such as cutting with pure oxygen, the cutting speed will decrease even more. When the thickness is adjusted to 40mm, the cutting speed is limited to 500mm/min to ensure the cutting effect and quality.
Each row matches amperage with thicknesses that will produce what hypertherm calls a “cut category #1”. If you switch to other auxiliary cutting gases, such as cutting with pure oxygen, the cutting speed will decrease even more. The chart below includes recommendations for mild steel cutting amperage and material thickness when using a hypertherm® xpr300™ plasma system.
2 Plasma cutter settings chart
If You Switch To Other Auxiliary Cutting Gases, Such As Cutting With Pure Oxygen, The Cutting Speed Will Decrease Even More.
Under the same cutting current of 230a, although pure oxygen plasma cutting can be increased to. Steel cut with o 2 plasma/air shield with iron oxide film.
Each Row Matches Amperage With Thicknesses That Will Produce What Hypertherm Calls A “Cut Category #1”.
The chart below includes recommendations for mild steel cutting amperage and material thickness when using a hypertherm® xpr300™ plasma system. When the thickness is adjusted to 40mm, the cutting speed is limited to 500mm/min to ensure the cutting effect and quality.
